| History
The seed that there had to be an easier method of removing the hassle out of rolling covers or tent flaps was planted over 20 years ago.
I was introduced into camping at a very young age not only camping but also sitting at the back of a vehicle which
utilizes a canvas back
drop as a “door / opening". Those of you who have done either will be fully aware
that there are things in common associated to both – the covers that serve
as the opening can be a nuisance when trying to roll away.
Problem
-
Firstly there is only up or down.
-
There is no mid way position for
the flap or cover. You cannot control the height of the flap therefore unable to control the light, air etc
entering.
-
It is generally a tedious affair having to roll covers of boat, tent, truck, awnings etc.
-
Rolling by hand is perhaps the single most factors that destroys the quality of clears through scratching, cracking, marking and fingerprints etc.
Solution
Investigations and studies into what could be used effectively to assist
in the automatic rolling of covers lead us to develop a unique concept, branded as Roll-ett.
- By incorporating specialized springs into sleeves attached to the
coverings, we are able to effectively retract flaps,
partially or fully.
-
Roll-ett can be applied to covers of various
shapes, sizes as well as to many diverse applications or products.
- Further value added through, a simple to install, simple to use and
inexpensive concept.
|
